Home > Invar 42 Sheet and Plate
Al Vishwas Nickel Alloys distinguishes itself as a trustworthy manufacturer and supplier of premium Invar 42 Sheet and Plate, proudly running its advanced facility in Dubai, UAE. Known for precise engineering and reliability, the company supplies materials tailored for uses that require outstanding dimensional stability and regulated thermal expansion. By emphasizing quality, modern processing methods, and a customer-focused philosophy, Al Vishwas Nickel Alloys ensures that each Invar 42 product complies with international standards. Their Invar 42 Sheet and Plate enjoy strong recognition across the electronics, aerospace, instrumentation, and scientific sectors, positioning the company as a preferred partner for specialized alloy solutions.
Invar 42 Sheet and Plate consist of roughly 42% nickel and 58% iron, engineered to deliver a controlled and low coefficient of thermal expansion. This finely tuned makeup guarantees exceptional dimensional stability even under temperature changes. From a mechanical standpoint, Invar 42 offers good strength, high toughness, and superb ductility, which makes it ideal for precision parts. The alloy preserves its structural integrity throughout thermal cycling and provides dependable machinability and formability. Thanks to its steady thermal behavior and stable mechanical characteristics, Invar 42 is a perfect selection for applications demanding tight dimensional control.
| Standards : | Per Chem Mil-I-23011C CL 7, Boeing D-33028, ASTM B753, ASTM F1684, ASTM F30 |
| Dimensions : | ASTM, ASME, and API |
| Sheets Thickness : | Range from .008″ to .0125″ |
| Shims Thickness : | Range from .01″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Sheets/Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets/Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Invar 42 | KSI (MPa) 36 / (248) | KSI (MPa) 71 / (490) | 40 % |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
| Density | 0.293 lb/cu in |
| Specific Gravity | 8.12 |
| Curie Temp | 715 oF or 380oC |
| Melting Point | 2600 oF or 1427oC |
| Electrical Resistivity | 66 Micro-ohm-cm or 400 ohm-cir mil/ft |
| Thermal Conductivity | 10.7 W/cm oC or 74.7 BTU-in/sq. ft-hr |
| Specific Heat | 0.12 Cal/g- oC |
| Thermal Expansion | 5.0 ppm / oF (75oF to 842oF) or 9.0 ppm / oC (25oC to 450oC) |
At Al Vishwas Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Nimonic Sheet and Plates in Dubai, UAE, delivering advanced solutions for every one of your piping requirements. Our modern manufacturing facilities are strategically positioned in the UAE, enabling us to keep an extensive stock of more than 16,000 tons of top-quality materials on hand and ready to ship. We are committed to providing outstanding products and services, guaranteeing dependability and excellence for our worldwide customers.
Reach out to us for a fast quote on your requirement.
Invar 42 Sheet and Plate are widely used across industries where low thermal expansion and accurate dimensional stability are essential. They are commonly used in electronic components, lead frames, and semiconductor packaging thanks to their compatibility with glass and ceramic materials. The aerospace and defense industries rely on Invar 42 for precision instruments, optical devices, and structural parts that demand thermal consistency. In scientific and industrial settings, Invar 42 is prized for its dependability and performance, making it a favored option across many fields.
